Areco Roofing Supplies
HomeCompany ProfileRoofing AccessoriesPlastic Building ProductsPlastic Building Products Contact
     

Wall Vents & Closures

 

Product Range


Core Drill Vent

The Core Drill Vent offers a through wall ventilation system with a facility to increase or decrease the air flow into the dwelling.

The 5 inch Core Drill Vent has been designed predominantly for use when ventilating a gas appliance, although it can be used to supply general through wall ventilation.

Supplied in kit form comprising of a cowl vent for exterior use, a louvre grille for interior use, a 350mm length of pipe duct and an anti –draft baffle. The baffle reduces the airflow and also the feel of a draught through the vent. The vent can easily be fitted in both refurbishment and new build situations with the use of a 5 inch (127mm) diameter core drill.

Core Drill Vent

Without the use of the anti-draught baffle, the free area of the vent is 100cm2, enough to supply an appliance with rated input of 27kW or 92,000 Btu/h (in accordance with BS5440 Pt.2.2000).

With the anti-draught baffle installed, the effective free area of the vent is reduced to 70cm2 (BRE tested) providing enough ventilation for an appliance with an input rating of 21 kW or 71,500 Btu/h.

For further technical info visit www.manthorpe.co.uk.

Download Core Drill Vent Product Literature
Contact us for more information

 

Multi-width Wall Cavity Closure

Suits standard cavity widths between 50mm and 100mm.

Wall cavity closure

The multi-width cavity closure provides a versatile solution to cold bridging problems. They also save time in construction by closing the cavity without the need to return to the blockwork.

An economical solution to closing the cavity at window and door reveals, they also act as an effective vertical damp proof course. The multi-width cavity closure also addresses the issues of condensation and promotes air tight detail. The cavity closure is non-load bearing and should not be used as a replacement for traditional methods of fixing window and door frames to the masonary.

Requiring no special tools the multi-width cavity closure can simply be cut with a saw with no loss of thermal efficiency.

Supplied in 100mm width with groove guides for cutting to various widths.

For further technical info visit www.manthorpe.co.uk.

Download Wall Cavity Closure Product Literature
Contact us for more information

 
POLYCARBONATE SHEETING
Twin wall, triple wall and structured roofing sheets.
 
GLAZING BARS
Self-supporting and rafter supported systems.
 
MAXIPORT
Multi-purpose Canopy System.
 
UPVC FASCIAS, SOFFITS, CLADDING & TRIMS
Fascia board, soffits, cladding and finishing trims.
 
RAINWATER PRODUCTS
Gutter and downpipe products plus full range of accessories.
 
WASTE PIPES AND FITTINGS
Plastic Push-fit waste pipes, fittings and plastic waste traps.
 
DOOR CANOPIES
GRP moulded door canopies and Aquila canopies.
 
PLASTIC SHEET
Plastic sheet material for roofing and glazing.
 
SKIRTINGS & ARCHITRAVES
Skirting and Architraves in hand crafted effects.
 
DADO RAILS
Attractive lightweight
and durable moulded Dado Rails.
 
COVING
A revolutionary alternative to traditional plaster cove.
 
DECORATIVE INTERIOR CLADDING
Decorative Cladding ideal for bathrooms, kitchens, bedrooms, offices and shops.
 
LOFT DOORS & ACCESS PANELS
Range of practical loft doors and access panels.
 
WALL VENTS & CLOSURES
Range of wall vents and closures.